INSTALLATION
To be installed by a competent person with reference to BS 7671 or equivalent local standards. If in doubt consult a qualifi ed electrician.
- Plan where the INGY-HBWD DALI is to be located (see diagram 1). Switch off supply and check for hidden cables and pipes.
- The INGY-HBWD DALI should be connected as shown in diagrams 2 and 3: L Live in. N Neutral in. + DALI control line (polarity independent) – DALI control line (polarity independent)
- Knockout or drill the appropriate holes on the mounting plate for attaching the plate to the ceiling or back box (if applicable). Feed cables through the appropriate (side or rear) entry hole. Screw the back mounting plate to the ceiling or back box via the mounting holes. Wire the cables into the sensor head block terminal. Push the sensor head onto the mounting plate and align the side clips with the slots on the sensor heads.
