INGY-CEFLDALI

INSTALLATION
To be installed by a competent person concerning BS 7671 or equivalent local standards. If in doubt consult a qualified electrician.
• Plan where the INGY-CEFLDALI is to be located (see diagram 1). Switch off supply and check for hidden cables and pipes. Make a 73/75mm diameter hole through a standard ceiling board.
• The INGY-CEFLDALI should be connected as shown in diagram 2: L – Live in. N – Neutral in.
• Ensure both springs are fitted to the molding in the correct orientation (see diagram 3).
• Push the INGY-CEFLDALI into the ceiling void, referring to diagram 4.